Used Cushion Tire Forklift Alabama - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
When considering the benefits and drawbacks of cushion tires in forklift uses, it is important to discuss the benefits and drawbacks of the other available forklift tire option: the pneumatic tire. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are made up of either smooth or treaded solid rubber and are designed around a metal ring or baseband. These types of forklift tires are easier to maintain and less expensive to manufacture. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. These tires are designed to maneuver well within tight locations, due to their specific turning radius. Forklifts that use cushion tires can be lower to the ground compared to pneumatic tire models and the increase in vertical clearance is welcome for many applications. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
Cushion tires forklifts are commonly used for organizing inventory, moving items to and from different loading docks, unloading shipments and similar applications.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The main difference with these categories is that the standard air pneumatic tires consist of a layered rubber design filled with air and the solid resilient pneumatic type is made completely out of rubber.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. Locations that have sharp debris or objects that could puncture a standard air pneumatic tires such as junkyards or lumber yards will benefit from solid resilient pneumatic forklift tires.
Benefits of Cushion Tire Forklifts
Forklifts fitted with cushion tires are a good option for operation on smooth surfaces, both indoor and outdoor. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. Cushion tire forklifts are commonly used in warehouses and manufacturing plants. Cushion tire models excel in tight locations including narrow aisles and accessing high shelves.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor forklift models that use cushion tires feature lower clearance compared to pneumatic tire models. This enables the machine to travel through doors and navigate obstacles such as sprinkler systems ad lights much easier.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Most cushion tire forklift models use a fuel cell or battery as opposed to an internal combustion engine and are much quieter compared to their diesel or propane counterparts.
5) Environmentally Friendly
Again, because most cushion tire forklifts are powered by electricity, rather than an internal combustion engine, cushion tire forklifts produce no harmful emissions.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. Tires and axles are specific to the lifting capacity and the machine’s frame. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Because of this, it is more useful to choose the best forklift type, considering the type of tires the forklift will require and how it fits the job application, rather than attempting to modify the forklift by choosing the right tire for the application.
Workplace Applications
Suitable Work Applications for Cushion Tires
There are many work applications suitable for using cushion tire forklift models. If most of the transporting, lifting loads and placement happens inside or with limited outdoor use on smooth surfaces, cushion tire forklifts are your best choice.
Sitting closer to the ground, cushion tire forklifts have a tinier frame compared to pneumatic tire forklifts. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the top advantages of the cushion forklifts is their tight turning radius. Cushion tire forklifts are excellent for manufacturing facilities and warehouse operations that are compact with less space. Warehouses that utilize a narrow aisle layout will especially benefit from the smaller turning radius of cushion tire forklifts. Cushion tire forklifts are also less expensive and are more readily available than pneumatic tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Some interior locations may utilize pneumatic tire forklifts; however, they do not offer a small turning radius or the lower clearance and maneuverability that the cushion tires provide. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
There are two kinds of pneumatic tires; the air-filled pneumatic tire is less expensive than the solid pneumatic tire. The solid pneumatic tire has no air inside and is made from solid rubber. This design makes the tire stronger against punctures or gouges. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air pneumatic tires work great outside on gravel and asphalt applications. However, air pneumatic tires are susceptible to being punctured or gouged. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. It is possible to foam fill the pneumatic forklift tires for a smoother ride. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Foam filling is commonly used for flat tire prevention. It is necessary to plan for enough time when foam filling an air pneumatic tire as it can take up to 3 days to fill and cure properly.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Some electric powered cushion tire forklifts do have lift limits. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. Load capacities come in a wide range - from less than 2,000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
